Servo Controlled Voltage Stabilizer
3 Phase Oil Cooled
Capacity range upto 1500 KVA 3Ph
Data Log: Last 100 fault events log with Date & Time stamp and works on FIFO basis.
Optional:Out Door Model also Available
High Reliability
Uses Solid state control circuits, Synchrnous motor drive, No warm-up time, No relays, Professional grade ICs and components are used.
Trouble free operation
Quick response time 10 millisec (half a cycle), Efficiency, Low losses, Low temp. rise and withstands in all climate conditions, Provides perfectly stable output power even under severe conditions of voltage fluctuations, Zero wave-form distortion, Unaffected by load power factor, Ruggedized construction Enclosure-IP32, Mounting- Floor Mounted/Free on Wheel, Servo Motor Drive- Rugged AC step synchronous motors.
• CNC Machines
• Telecommunications Equipments
• Bio Medical Equipments
• Large Computer Installations
• Printing Machinery
• Scientist Equipments
• Cell Phone Networks
• Garments Equipments
• Textile Machineries etc
| Ouput | Input | Rating Available |
|---|
| Particular | Standards |
|---|---|
| Input Voltage Range | 300 - 460V / 340 - 480V / 360 - 460V AC 3 Ph |
| Output Voltage (3 Ph) | 415V AC |
| Operating Frequency | 47 yo 53Hz |
| Output Voltage Adjustable | 380 to 415 V AC in 3 Ph |
| System | Unbalanced 4 wire: R Y B N |
| Connections | Star |
| Overload Capacity | 120% |
| Operating Frequency | 47 to 53 Hz |
| Output Voltage Regulation | + 1% (No Load and Full Load] |
| Output Waveform | True Reproduction of Input |
| Correction Rate | 25 / 15V per Sec-3 Phase |
| Waveform Distortion | Nil |
| Short Circuit period & Percentage | 300% for 250 Milli Sec. |
| Insulation | Class B |
| Normal Operation Temperature | 0° C to 45° C |
| Climate Conditions | 90% Rh Max. Non Condensing at 35°C |
| Mode of system | Fully Automatic |
| System Construction | As per IS :9815 - 1994 |
| Type of cooling | Natural Oil Cooled up to l500 KVA |
| Indications in LCD Display | Indications | Programmable Controls |
|---|---|---|
| Input High and Input low | Mains Input ON 3 LED Indications | Display Scrolling - Auto / Manual |
| Output on indication | 3ph output ON indication | Start / Stop Buttons |
| Output high Cutoff and Output Low Cutoff | Phase Reversal indication | |
| over Load indication |
